| Type |
FS-250-12 |
FS-250-15 |
FS-250-24 |
|
Output |
Dc output voltage
|
12V |
15V |
24V |
Output voltage tolerance
|
¡À1% |
¡À1% |
¡À1% |
Rated output current
|
20A |
16A |
10A |
Output current range
|
0-20A |
0-16A |
0-10A |
Output power
|
240W |
240W |
240W |
Ripple and the noise
|
120mVp-p |
150mVp-p |
150mVp-p |
Dc voltage adjustable scope
|
¡À10% |
¡À10% |
¡À10% |
Start, up, and keep time
|
180ms,30ms,30ms/230VAC |
| Input |
Input voltage range
|
90~132VAC/180~264VAC(The switch choice)47~63Hz,255~373VDC |
Exchange input current
|
5A/115A 2.5A/230VAC |
Efficiency
|
80% |
80% |
82% |
Impulse current
|
Cold start current 50A/230VAC |
Leakage current
|
<3.5mA/240VAC |
Protection
characteristics
|
Overload protection
|
Rated output power of 105% ~ 135% start over load protection |
| Protection way: rated current restrictions, load can be removed abnormal conditions after recovery |
Over-voltage protection
|
15~17V |
18~20V |
28~30V |
| Protection way: hiccups mode, remove abnormal conditions can be restored |
Thermal protection
|
Internal temperature ¡Ý85 ¡æ start frequency thermal protection |
| Protection way: shut off the output, when the temperature can be restored after returning to normal |
| Environment |
Working temperature, humidity
|
-10¡æ~+60¡æ;20%~90%RH(Please refer to reduce the specified number load curve) |
Keep temperature, humidity
|
-20¡æ~+85¡æ;10%~95%RH No condensation |
Vibrate resistance
|
10~500Hz,2G 10min./1 Cycle, duration 60 minutes, the axis |
| Security |
Compression sex
|
Input/output between: 1.5KVAC Input and ground:1.5KVAC Output and ground: 0.5KVAC |
Insulation resistance
|
Between input and output: input and the earth, the output and the earth: 100M 0hms/500VDC |
Conform to
the standards |
Safety standards |
Accord with UL1012 |
EMC standards
|
Accord with EN55022,CLASSA |
Other
|
Weight
|
0.9kg 215*115*50mm (L*W*H) |
Packaging
|
0.9kg/24pcs/22.5kg |
Note: 1. All the parameters in has not specified, all is in 230VAC voltage input, rated load and 25¡æ conditions measuring income value.
2. Ripple and noise voltage is in 20MHz bandwidth oscilloscope take 12 inches double lines end with 0.1¦Ìand 47¦Ì when capacitance measurement.
3. Tolerance is voltage setting error, the voltage adjustment rate and the current adjust rate combined. |
