| Type |
MS-100-5 |
MS-100-12 |
MS-100-24 |
|
Output
|
Dc output voltage
|
5V |
12V |
24V |
Output voltage tolerance
|
¡À1% |
¡À1% |
¡À1% |
Rated output current
|
20A |
8.3A |
4.2A |
Output current range
|
0-20A |
0-8.3A |
0-4.2A |
| Output power |
100W |
100W |
101W |
Ripple and the noise
|
80mVp-p |
120mVp-p |
150mVp-p |
Dc voltage adjustable scope
|
-9%~+10% |
¡À10% |
¡À10% |
Start, up, and keep time
|
500ms,20ms,24ms/230VAC.800ms,30ms,20ms/115VAC |
Input
|
Input voltage range
|
90~132VAC/180~264VAC 47~63Hz(The switch choice),254~373VDC |
Exchange input current
|
2.4A/115VAC 1.2A/230VAC |
Efficiency
|
79% |
83% |
85% |
Impulse current
|
Cold start current 35A/230VAC |
Leakage current
|
<3.5mA/240VAC |
Protection characteristics
|
Overload protection
|
Rated output power of 115% ~ 135% start over load protection |
| Protection way: hiccups mode, load abnormal conditions can be removed to recover |
Over-voltage protection
|
6.2~6.8V |
15~16V |
30~31V |
| Protection way: hiccups mode, abnormal conditions can be removed to recover |
Environment
|
Working temperature, humidit |
-10¡æ~+60¡æ;20%~90%RH(Please refer to reduce the specified number load curve ) |
Keep temperature, humidity
|
-20¡æ~+85¡æ;10%~95%RH No condensation |
Vibrate resistance
|
10~500Hz,2G 10min./Cycle, duration 60 minutes, the axis |
Security
|
Compression sex
|
Input/output between: 1.5KVAC Input and ground: 1.5KVAC Output and ground: 0.5KVAC |
Insulation resistance
|
Between input and output: input and the earth, the output and the earth: 100M 0hms/500VDC |
| Conform to the standards |
Safety standards
|
Accord with UL1012 |
EMC standards
|
Accord with EN55022,CLASSA |
Other
|
Weight
|
0.48kg 159*97*38mm (L*W*H) |
Packaging
|
0.48kg/45pcs/22.5kg/0.9CUFT |
Note: 1.All the parameters in has not specified, all is in 230 VAC voltage input, rated load and 25 ¡æ conditions measuring income value.
2.Ripple and noise voltage is in 20 MHz bandwidth oscilloscope take 12 inches double lines end with 0.1¦Ìand 47¦Ì when capacitance measurement.
3.Tolerance is voltage setting error, the voltage adjustment rate and the current adjust rate combined. |
